800W Pure Sine Wave Power Inverter for solar power system

800W Pure Sine Wave Power Power Inverter for solar power system 1 DC input voltage 12V/24V DC 2 Output voltage 220 AC

800W Pure Sine Wave Power Power Inverter for solar power system

SPECIFICATION MODEL MP-12-800 Power Inverter 12VDC to 220VAC(800W)

The Inverter is an electronic device which converts 12 Volt DC voltage from a battery or other source to 220 Volts household AC power.

IINPUT PROPERTY 1 DC input voltage 12V DC 2 DC input voltage range 11 to 15 V DC 3 Low battery alarm 10.5V DC &plusmn; 0.2V DC 4 Low battery shutdown 10.0 V DC & 0.2V DC 5 No load current draw <0.6 A DC 6 High voltage shutdown 15.0V DC & 0.2V DC 7 Fuse (internal) 40A& 3(MAX) Replaceable 8 Input reverse protection Blow fuse

OUTPUT PROPERTY 1 Output voltage 220 AC (RMS)() & 3% 2 Output frequency 50Hz & 0.3Hz 3 Output wave form Pure sine wave(&plusmn; 3%) 4 Continuous output power 800W 5 Overload output power 880W & 40W 6 Surge capacity (Peakower) 1600W

II GENERAL CHARACTERISTICS 1 2 Efficiency (except power loss on the wire) >90% Full load 3 Over load protection Yes RED LAMP LIGHT, FOUR SPEAKER ALARMS 4 Short circuit protection Yes RED LAMP LIGHT, FIVE SPEAKER ALARMS 5 Over temperature shutdown 65D& 5D RED LAMP LIGHT, FIVE SPEAKER ALARMS 6 Operating temperature range -5-40D 7 Storage temperature range -20-50D 8 Operating relative humidity 10%-90% 9 Storage relative humidity 5%-95%

III MECHANICAL CHARACTERISTICS 1 Dimension 253*140*60mm L& W& H 2 Net weight 1.4KG 3 Outlet CP2 4 Connector DC cable 5 Cool mode By fan

800W Pure Sine Wave Power Inverter for solar power system